Manual Gun MG300

  • Features TOTAL ENERGY CONTROL (Patent Pending) unique charging system giving automatic control of both current and voltage.
  • Incorporates a field replaceable power supply.
  • Light, well balanced and comes complete with a circular deflector and flat nozzle giving excellent penetration.
  • Regulated forward air to the spray nozzle assembly is multifunctional.

BS EN 50 050


Box Feed C85D

  • Features TOTAL ENERGY CONTROL (Patent Pending) unique charging system giving automatic control of both current and voltage.
  • Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability.
  • Colour changes in seconds - simply unclip the venturi, remove the suction tube and blow clean.
  • Vibrating Chassis  - mounted at an angle in two planes so that powder is extracted from the lowest point ensuring maximum powder utilisation.
  • High efficiency turbine vibrator activated only on triggering of gun to minimise powder compaction, fluidised suction head also activated only on triggering.
  • Accepts all popular powder containers up to 30kg (66lbs).
  • Controlled powder support arm simply lifts clear to a park position for fast box replacement when changing colours.
  • Can be supplied as a single or double operator unit.
  • Box feed unit may also be configured for AG300 automatic powder guns or as fresh powder transfer units.

BS EN 50 050


Fluid Bed C85H

  • Features TOTAL ENERGY CONTROL (Patent Pending) unique charging system giving automatic control of both current and voltage.
  • Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability.
  • Unit is robust, stable and easily transportable on large conductive castors.
  • 25Kg (55lbs) Fluid bed simply lifts off the chassis base, cleaning could not be easier as the plenum and fluidising tile quickly detach from the bed body.
  • Can be supplied as a single or double operator unit.
  • Fluid bed unit may also be configured for AG300 automatic powder guns.

BS EN 50 050


Ultracom 300 (Lab Unit)

  • Ultra-Com 300 (Lab Unit) is designed for laboratory use, on site demonstrations and testing sampling. Only two services are required, a suitable air supply and an electrical connection point. The unit is the ultimate in portability and features;
  • Powder flow can be accurately controlled by the air pressure regulator on the face of the unit. Additional control can also be achieved by use of the flow regulator on the side of the spray gun.
  • Standard MG300 Electrostatic Powder Gun comes complete with a flat nozzle giving excellent penetration. The system incorporates TOTAL ENERGY CONTROL (Patent Pending), a unique charging system giving automatic control of both current and voltage.
  • Front loading cup assembly (85gms/3ozs capacity) complete with small and medium deflectors for coating reference panels and instant color changes.
  • Side loading cup assembly 170gms/6ozs capacity) comes complete with small, medium and large deflectors, ideal for component trials.
  • Blow down gun included to facilitate colour change.
  • LED Lights indicates power on and static on.
  • Re-settable circuit breakers.
  • Adjustable electrical supply for worldwide use.